LCN-SR6G Issendorff KG
€250.99
% €325.33 (22.85% saved) previously €269.99
Available in 7 days, delivery time 2-5 days
Product information "LCN-SR6G Issendorff KG"
Relay Module with Six Outputs for DIN Rail
The LCN-SR6G is a six-channel relay module of the LCN bus system that does not require a separate LCN bus module. With its relays, any consumers can be switched. The LCN-SR6G can be expanded to eight relays if needed with an LCN-R2H.
Unlike the LCN-SR6, the relays of the LCN-SR6G have gold contacts, which are suitable for voltages below 20 V and currents below 100 mA.
Application Areas
- Control of any motors and drives
- Control of blinds and roller motors for shading and ventilation
- Control of any AC1 loads
Function Description
Operating Programs
The six relays are individually switched via command over the LCN bus. They can also be used to control roller drive motors; the LCN-SR6G can be switched to roller mode with the LCN-PRO. The relays support all common LCN functions, such as on/off/switching, timers, status commands, etc. For testing purposes, it is possible to switch the relays manually via a button on the top of the module independently of the LCN bus. Connection of conventional pushbuttons that distinguish short, long, and release: each 3 commands to 2 addresses (modules or groups). In total, there are 32 buttons in four tables. Additional internally managed buttons result in a total of 480 commands to 160 different target addresses.
Additional Functions
- 12 variables for capturing measurement values
- Analog value processing via thresholds or controllers.
- Two freely parameterizable continuous controllers. Measurement values and control variables can be distributed freely in the bus.
- Transponder data processing for up to 16 transponders, unlimited when operating the visualization LCN-GVS.
- Control with dependencies and links, blocking and releasing individual buttons, hierarchical permissions.
- Four timers (1 second to 45 days), two timers, periodic timer.
- Function acknowledgment: execution is clearly confirmed
- Automatic generation of real status messages for visualization.
- Four-stage acknowledgment and reporting system.
- Bypass of power failures up to 20 seconds with power failure detection.
- Operating hour counters for all circuits
Hardware Equipment
- 85 to 265 V, 50/60 Hz
- Six load relays with potential-free switching contacts as normally open and normally closed at 230 V~/16A, AC1
- Maximum inrush current 70 A
- Plug-in relays
- I-connection for the operation of LCN-RR, IR remote control receiver, LCN-TS temperature sensor, LCN-PMI motion detector, LCN-GRT/-GBL/-GUS indoor sensors, LCN-ULT universal transponder reader, LCN-GTxD glass info module, LCN-BT4H, LCN-BU4L, binary and pushbutton sensors, and more.
- P-connection as a digital input/output for extensions such as relays, LCN-R2H, LCN-BS4 current sensors, and more.
Manufacturer
ISSENDORFF KG
Wellweg 93
31157 Sarstedt (Werk 1)
Telefon: +49 5066 998-0
Telefax: +49 5066 998-899
Login
Alternative
Relay Module with Six Outputs for DIN Rail The LCN-SR6 is a six-channel relay module of the LCN bus system that does not require a separate LCN bus module. With its relays, any consumers can be switched. The LCN-SR6 can be expanded to eight relays if needed with an LCN-R2H. Thanks to a button on the top, the relays can be switched manually. The module does not need to be parameterized for this. This allows the wiring on the construction site to be checked before the LCN system is set up. Application Areas Control of any motors and drives Control of blinds and roller motor for shading and ventilation Control of any AC1 loads Hardware Equipment 85 to 265 V, 50/60 Hz Six load relays with potential-free switching contacts as normally open and normally closed at 230 V~/16A, AC1 Maximum inrush current 70 A Plug-in relays I-connection for the operation of LCN-RR, IR remote control receiver, LCN-TS temperature sensor, LCN-PMI motion detector, LCN-GRT/-GBL/-GUS indoor sensors, LCN-ULT universal transponder reader, LCN-GTxD glass info module, LCN-BT4H, LCN-BU4L, binary and pushbutton sensors, and more. P-connection as a digital input/output for extensions such as relays, LCN-R2H, LCN-BS4 current sensors, and more. Function Description Operating Programs The six relays are individually switched via command over the LCN bus. They can also be used to control roller drive motors; the LCN-SR6 can be switched to roller mode with the LCN-PRO. The relays support all common LCN functions, such as on/off/switching, timers, status commands, etc. For testing purposes, it is possible to switch the relays manually via a button on the top of the module independently of the LCN bus. Connection of conventional pushbuttons that distinguish short, long, and release: each 3 commands to 2 addresses (modules or groups). In total, there are 32 buttons in four tables. Additional internally managed buttons result in a total of 480 commands to 160 different target addresses. Additional Functions 12 variables for capturing measurement values Analog value processing via thresholds or controllers. Two freely parameterizable continuous controllers. Measurement values and control variables can be distributed freely in the bus. Transponder data processing for up to 16 transponders, unlimited when operating the visualization LCN-GVS. Control with dependencies and links, blocking and releasing individual buttons, hierarchical permissions. Four timers (1 second to 45 days), two timers, periodic timer. Function acknowledgment: execution is clearly confirmed Automatic generation of real status messages for visualization. Four-stage acknowledgment and reporting system. Bypass of power failures up to 20 seconds with power failure detection. Operating hour counters for all circuits
Konfigurationstool
Issendorff LCN-PRO+UPD The LCN-PRO+UPD is an upgrade for the LCN-PRO+ software that offers improved performance and support for the latest module features. This software is designed for professional electrical installers and allows for efficient parameterization and maintenance of LCN systems. Technical Details Optimized user interface for an improved user experience Full backward compatibility with all modules since 1998 Extended features for project editing Application Areas Upgrade existing LCN-PRO+ installations Efficient parameterization and maintenance of LCN systems Integration into existing visualizations
LCN Configuration Program WINDOWS The LCN-PRO is a powerful software for configuring, manual control, and troubleshooting LCN bus modules. The software automatically searches for all modules in the network and offers them for configuration. It allows reading and saving system data and provides extensive documentation of the systems. Technical Details Processor: 400 MHz or higher Memory: 64 MB or more Hard Drive: 3 MB of available storage space Operating System: Win95, Win98, WinME, Win2000, WinXP, Vista, 7 Connection: Serial RS 232, USB, TCP/IP Application Areas Configuration of LCN bus modules Troubleshooting and logging of LCN systems Offline project editing
Issendorff LCN-PRO+ The LCN-PRO+ is the latest generation of LCN parameterization software, specifically designed for professional electrical installers. It offers a modern user interface and powerful features for setting up, parameterizing, and maintaining LCN systems. The software is fully backward compatible and allows ultra-fast reading of LCN systems. Technical Details Full backward compatibility with all modules since 1998 Intelligent search function for module parameters and dependencies Modern bus recording for troubleshooting and tracking XML export for LCN-GVS and other systems Application Areas Setup and maintenance of LCN systems Efficient project processing for electrical installers Integration into existing visualizations
Sensorik
Weather Station with Evaluation Unit for DIN Rail For controlling all weather-resistant systems and functions of a building. Thanks to the GPS receiver, LCN-WIH transmits the precise time and date to the LCN bus. LCN-WIH consists of an outdoor unit with integrated wind, rain, light, temperature, and GPS sensors, and an indoor unit with power supply in a 2-TE housing. The indoor unit connects the weather station to the I connection of any LCN module via a 2-pair telephone cable. The sensor head is designed to be weather-resistant and translucent (3 light sensors inside the housing). It can be mounted either on the roof (mast) or on the wall (south side). Application Examples Automation of heating and air conditioning systems based on weather data. Integration into smart home systems for controlling outdoor facilities. Monitoring weather conditions for agricultural applications. Technical Data Dimensions of weather station: 96mm x 77mm x 118mm (W x H x D) Mounting: screw fastening Dimensions of evaluation unit: 38mm x 92mm x 66mm (W x H x D) Mounting: REG on 35mm mounting rail Protection class: IP20
Zubehör
Issendorff LCN-K3LCN-K3
4-channel button/binary sensor for DIN rail The LCN-BT4H is an innovative 4-channel button and binary sensor designed for mounting on a DIN rail. It can be used either as a binary sensor or as a button converter for mains voltage (230V AC). The four inputs of the LCN-BT4H are capable of evaluating signals of any phase position against N and are galvanically isolated from the I connection. Application Examples Control of light switches in living rooms or offices. Integration into smart home systems for controlling devices via buttons. Use in industrial applications for monitoring switching states. Technical Data Dimensions: 38mm x 92mm x 66mm (W x L x H) 35mm DIN rail mounting 2TE Protection class: IP20 Maximum number of inputs: 4
4-channel binary current sensor The LCN-BS4 is a highly developed 4-channel binary current sensor specifically designed for connection to the P connection of an LCN module. It enables precise monitoring and control of up to four AC consumers. In combination with the LCN-R8H, motors can be positioned with high precision and their travel distances can be limited. The LCN-BS4 is ideal for applications in building automation where accurate consumption measurement and control are required. Application Areas The LCN-BS4 is used in the automation of blinds, roller shutters, and other motorized devices. It is particularly useful in smart home systems where precise control of energy usage is required. The sensor reliably detects consumers starting from a power of 25W and is thus suitable for a variety of applications. Technical Data Maximum operating current: 16A Dimensions: 68mm x 92mm x 66mm (W x L x H) 35mm DIN rail mounting 4 TE Protection class: IP20 Isolation: Up to 4kV high voltage between the inputs
Button converter with 8 button inputs and 12 LED outputs for the DIN rail The LCN-TL12H is a versatile button converter designed for mounting on DIN rails. It allows connection to the T connection of the LCN module and is specifically developed for connecting conventional panels with buttons and display LEDs. The button converter captures up to 8 pulse inputs and controls up to 12 arbitrary LEDs, both with and without integrated resistors. Application Areas The LCN-TL12H is excellent for controlling lighting systems in commercial and private applications. It can also be used to control conventional panels with up to twelve LEDs, allowing for flexible adaptation to various installation requirements. Technical Data Dimensions: 68mm x 92mm x 66mm (W x L x H) Protection class: IP20
Adapter for extending and duplicating the I connection for DIN rail The LCN-IVH is an enhanced version of the LCN-IV adapter, specifically designed for DIN rail mounting. It allows for the doubling of the I connection and can also be combined with up to two LCN-IVH adapters to extend the range of the I connection with IY(ST)Y 2x2x0.8mm up to 50m. The LCN-IVH additionally acts as a pulse sensor that evaluates a 5V signal via potential-free contacts. Application Areas This adapter is particularly useful in installations where multiple sensors need to be operated on a bus module. It enables flexible and decentralized installation of sensors such as remote control receivers, temperature sensors, and binary sensors. Technical Data Frequency: maximum 500 Hz Dimensions: 17mm x 92mm x 66mm (W x L x H) DIN rail mounting: 35mm, 1TE Protection class: IP20
A/D converter The LCN-AD2 is a dual analog-to-digital converter with 12-bit resolution, specifically designed for the LCN bus. It enables the precise conversion of analog signals into digital values that can then be processed within the LCN system. With its flexible inputs, the LCN-AD2 can be configured for various applications, including voltage measurement, current measurement, and temperature measurement. Application examples Measurement of environmental conditions in smart home systems. Integration into heating and air conditioning systems for accurate control. Monitoring of industrial processes by capturing analog signals. Technical data Input options: 0-10V, 0/4-20mA, Pt100, Pt1000 LCN connection: I connection cable length 300mm Operating voltage: 230V~ ± 10% Dimensions: 34.5mm x 92mm x 66mm (W x L x H) 35mm DIN rail mounting 2TE Protection class IP20
Issendorff LCN-BU4LLCN-BU4L
Low Voltage Power Supply 12V The LCN-NH12 is a compact low voltage power supply that provides a stable DC voltage of 12V required for operating 12V motors. It offers switchable polarity, increasing flexibility in application. The power supply is fed via connected switching outputs with 230V/50Hz, allowing for easy integration into existing systems. It is ideal for applications where a reliable and constant power supply for motors is needed, such as for roller shutters or blinds. Technical Data Maximum Output Power 12W Dimensions: 68mm x 92mm x 66mm (W x L x H) 35mm DIN Rail Mounting 4TE Protection Class IP20
Aktorik
Relay module with 2 x 16A changeover contacts The LCN-R2H is an advanced relay module specifically designed for the individual and independent operation of up to two electrical consumers. This module is ideal for controlling motors, such as blinds, shutters, or awnings, which are controlled via the P terminal of an LCN module. The LCN-R2H features two load relays, each equipped with two changeover contacts, allowing for flexible use. The integrated operating and status LED provides simple visual feedback on the operational status of the module. Application Examples Control of blinds and shutters in smart homes Automation of awnings for terraces and balconies Individual control of electrical consumers in residential and commercial spaces Technical Data Operating and status LED Integrated power supply: 230V ±15%, 1W Relay type: Changeover contact 230V/16A, AC1 (resistive load) Max. inrush current: 70A Operating current: 100mA-16A Dimensions: 34.5mm x 92mm x 66mm (W x L x H) 35mm DIN rail mounting, 2TE Protection class: IP20
LED 4-Channel Dimmer for DIN Rail 4TE The LCN-HL4+ is an advanced 4-channel dimmer specifically designed for controlling constant voltage LEDs. It allows the integration of LED strips and high-performance floodlights into the Local Control Network and offers a maximum output power of 480W at 24V. The dimmer supports both RGB and RGBW LEDs and enables precise color control via the HSB color model. Application Areas Lighting for living spaces, offices, and commercial areas. Effective accent lighting with RGB and RGBW LEDs. Flexible lighting design through individual dimming and color control. Technical Data Input Voltage: 12-24V DC Power Loss: <1W Output Power: 480W (at 24V DC) PWM Frequency: 200Hz to 1kHz Operating Temperature: -10°C to +40°C Protection Class: IP20 Dimensions: 34mm (2TE) x 92mm x 66.5mm
LED 4-Channel Dimmer 960W for DIN Rail 4TE The LCN-HL48 is a powerful four-channel dimmer specifically designed for integrating constant voltage LEDs into the Local Control Network (LCN). It is excellent for controlling LED strips or high-performance floodlights that use RGB or RGBW LEDs. With this dimmer, you can create impressive light accents, for example, for color design of alcoves, bases, or for illuminating large areas. The LCN-HL48 is mounted on a DIN rail, allowing for easy installation in existing control cabinets. The maximum output power is 960 watts at an operating voltage of 48 volts, allowing for flexible use in various applications. Up to seven LCN-HL48 can be operated on one bus module, increasing the expandability and adaptability of the system. Color selection is done via the RGB/RGBW or HSB color model, allowing for precise and color-accurate control of the light color. The dimmer converts the values of the four outputs of a bus module, ideally an LCN-SHS, into pulse width modulation (PWM). The adjustable PWM frequency between 200 Hertz and 1 kilohertz prevents stroboscopic effects that can occur with machines or cameras. The configuration of the LCN-HL48 is done via the parameterization software LCN-PRO from version 6.6. Technical Data Input Input Voltage: 12-48V DC (use power supply with overload protection) Power Loss: <1W Output Power: 960W (at 48V DC) Terminal/Wire Type (Output): screwless, solid max. 2.5mm2 or stranded with ferrule max 1.5mm2 LCN Connection: I connection socket, galvanically isolated from the load side, I connection cable length 300mm (pluggable), extendable via LCN-IVH up to max. 50m. Installation Operating Temperature: -10°C to +40°C Humidity: max. 80% rel., non-condensing Protection Class: IP20 Environmental Conditions: Use in fixed installation according to VDE632, VDE637 Dimensions/Installation: 34 mm (2TE) x 92mm x 66.5mm for mounting on a 35mm rail (DIN50022)