LCN-R8H Issendorff KG

Relay module with 6 x 16A changeover contacts The LCN-R6H is a compact relay module designed for the independent operation of up to 6 consumers or for controlling up to 3 motors. With its 6 changeover contacts, it offers a flexible solution for automating electrical devices in residential and commercial properties. If necessary, an additional LCN-R2H can be connected to expand the number of control channels. Application Areas This relay module is ideal for controlling lighting, heating, and other electrical devices. The ability to control multiple consumers independently makes it an excellent choice for smart home systems. Technical Data Operating and status LED Integrated power supply: 230V ±15%, 2W Relay type: Changeover contact 230V/16A, AC1 (resistive load) Max. inrush current: 70A Operating current: 100mA-16A Dimensions: 114mm x 92mm x 66mm (W x L x H) 35mm DIN rail mounting 6.5TE Protection class: IP20

Relay module with 2 x 16A changeover contacts The LCN-R2H is a highly developed relay module specifically designed for the individual and independent operation of up to two electrical consumers. This module is ideally suited for controlling motors, such as blinds, roller shutters, or awnings, which are controlled via the P connection of an LCN module. The LCN-R2H features two load relays, each equipped with two changeover contacts, allowing for flexible use. The integrated operating and status LED provides simple visual feedback on the operating status of the module. Application examples Control of blinds and roller shutters in smart homes Automation of awnings for terraces and balconies Individual control of electrical consumers in residential and commercial spaces Technical data Operating and status LED Integrated power supply: 230V ±15%, 1W Relay type: Changeover contact 230V/16A, AC1 (resistive load) Max. inrush current: 70A Operating current: 100mA-16A Dimensions: 34.5mm x 92mm x 66mm (W x L x H) 35mm DIN rail mounting, 2TE Protection class: IP20

Relay module with six outputs for DIN rail The LCN-SR6 is a six-channel relay module of the LCN bus system that does not require a separate LCN bus module. With its relays, any consumers can be switched. The LCN-SR6 can be expanded to eight relays if needed with an LCN-R2H. Thanks to a button on the top, the relays can be switched manually. The module does not need to be parameterized for this. This allows the wiring on the construction site to be tested before the LCN system is set up. Application areas Control of any motors and drives Control of blinds and roller motor for shading and ventilation Control of any AC1 loads Hardware features 85 to 265 V, 50/60 Hz Six load relays with potential-free switching contacts as normally open and normally closed at 230 V~/16A, AC1 Maximum inrush current 70 A Plug-in relays I-connection for the operation of LCN-RR, IR remote control receiver, LCN-TS temperature sensor, LCN-PMI motion detector, LCN-GRT/-GBL/-GUS indoor sensors, LCN-ULT universal transponder reader, LCN-GTxD glass info module, LCN-BT4H, LCN-BU4L, binary and button sensor and more. P-connection as digital input/output for extensions such as relays, LCN-R2H, LCN-BS4 current sensors and more. Function description Operating programs The six relays are switched individually by command via the LCN bus. They can also be used to control roller shutter drives; the LCN-SR6 can be switched to roller shutter mode with the LCN-PRO. The relays support all common LCN functions, such as on/off/switching, timers, status commands, etc. For testing purposes, it is possible to switch the relays manually via a button on the top of the module, independently of the LCN bus. Connection of conventional buttons that distinguish short, long, and release: each 3 commands at 2 addresses (modules or groups). In total, there are 32 buttons in four tables. Further internally managed buttons result in a total of 480 commands to 160 different target addresses. Additional functions 12 variables for capturing measurement values Analog value processing via thresholds or controllers. Two freely parameterizable continuous controllers. Measurement values and control variables can be distributed arbitrarily in the bus. Transponder data processing for up to 16 transponders, unlimited when operating the visualization LCN-GVS. Control with dependencies and links, locking and releasing individual buttons, hierarchical permissions. Four timers (1 second to 45 days), two timers, periodic timer. Function acknowledgment: the execution is clearly confirmed Automatic generation of real status messages for visualization. Four-stage acknowledgment and reporting system. Bypass of power failures up to 20 seconds with power failure detection. Operating hour counters for all circuits