LCN-PKU Issendorff KG

DOMIQ - Base D-BL-2A (32MB) The DOMIQ Base D-BL-2A is the latest generation of the management module for building automation. With 32 MB of memory, it offers advanced features and an improved user interface. It enables the creation of complex automation rules and scenarios that respond to various conditions. Application Areas The DOMIQ Base D-BL-2A is suitable for demanding automation projects in residential and commercial properties that require high flexibility and adaptability. Technical Data Memory: 32 MB Integration: LCN system User Interface: intuitive and customizable Advanced Automation Features: Yes

LCN-PKU2 The LCN-PKU2 is an active coupler from USB-C to the LCN bus. It connects the LCN-PRO+, the LCN-GVS or third-party systems to the local bus at high speed. Thanks to the built-in processor, even (non-real-time capable) programs under Windows or Linux can access the bus without interference. When permanently installed, the LCN-PKU2 stores group names. This makes the entire documentation of the building retrievable. In addition, the LCN-PKU2 also records all bus traffic without a PC (configurable). Application Areas The LCN-PKU2 serves in LCN systems as a system access for laptops and PCs. Through this access, the parameterization of the LCN system is carried out by the installer. As a connection of the visualization on the PC. Using the system software LCN-GVS, direct and bidirectional data exchange between LCN system states and changes as well as direct control commands from the visualization PC takes place.

Coupling and visualization module for connection to a network The LCN-VISU is a combined visualization and network coupling module for the LCN bus. Communication takes place via LAN with RJ45 or WLAN. The coupler includes the LCN-PCHK service. It is compatible with all LCN bus modules from firmware 0701... (January 1997). Application areas Typical application areas of the LCN-VISU are: Remote maintenance with LCN-PRO Visualization with LCN-GVS Coupling with PCK protocol Visualization with OpenHAB The LCN-VISU serves as network access to the LCN system in LCN systems. Through this access, the LCN system is parameterized by the installer or coupled to other systems across trades. Another application case is the connection of the LCN visualization to the PC. With the system software LCN-GVS, direct and bidirectional data exchange occurs between LCN system states and direct control commands from the visualization PC. The new integrated OpenHAB visualization is quickly set up; it is automatically generated based on the labels and comments in the PCN-Pro programming. A connection of all devices available for the OpenHAB standard is also easily possible. Hardware equipment RJ-45 interface WLAN interface Connection to the LCN bus Optical status display of the operating state Note: It is not possible to access the LCN-VISU with two LCN-PRO of the same license. Function description The LCN-VISU supports two simultaneous PCHK connections to the LCN bus, allowing LCN-GVS and LCN-PRO to access the bus simultaneously. The PCHK monitor under Windows serves optionally for further configuration and monitoring of the LCN-VISU. For the third connection to the LCN bus, a full version LCN-PCHK license must be entered via the PCHK monitor. Each additional connection requires an upgrade license. Coupling LCN-PCKTo bring the data of a third-party application onto the LCN bus via LCN-PCK, this software is required. It buffers incoming and outgoing commands and messages, checks and translates them. The TCP/IP network is used as the communication link. This protocol works with simple ASCII character strings. An example: M000111A1100010 means module 111 in segment 000, output 1 at 100 with ramp 10. Feedback such as status or measurement values are also returned similarly simply and logically. This type of communication is quick and easy to implement in third-party applications. Date/Time With an existing internet connection, the LCN-VISU regularly resets the time. Thus, all LCN modules have the current time, which can be displayed on an LCN-GT4D/-GT10D. This function can be configured via the VISU web interface. Technical data Connection Supply voltage: 85V - 265V, 50/60 Hz Power consumption: 2 W Supply terminals: tool-free, solid max. 2.5 mm² or stranded with end sleeve max. 1.5 mm², through-wiring current max. 16 A Connection to the network LAN: RJ45 WLAN: 802.11b/g/n, WPA2 encrypted Installation Operating temperature: -10 to 40 °C Humidity: Max. 80% rel., non-condensing Environmental conditions: Use in fixed installation according to VDE 632, VDE 637 Protection class: IP20 The LCN-VISU galvanically isolates the LCN bus from the RJ45 socket up to 4kV. Scope of delivery: LCN-Visu

Issendorff LCN-VisuMod The LCN-VisuMod is a network coupling module with an interface to ModBus-IP. In addition to the functions of the LCN-VISU, the LCN-VisuMod offers an interface to ModBus. This allows the LCN-VisuMod to easily integrate ModBus devices that support the ModBus protocol into the LCN system. Application areas IP coupling with ModBus devices RTU coupling with ModBus devices (adapter required) Coupling to LCN-GVS LAN/WLAN coupling module Integrated visualization (Remote) maintenance of the LCN-PRO Technical data LCN-VISU (W x L x H): 37 x 92 x 66.5 mm 61.5 mm above the DIN rail Space requirement: 2 TE Mounting: REG on 35 mm DIN rail (DIN 50022) Manufacturer article number: 30366

Issendorff LCN-EPKU2 Coupling module with USB interface for installation (OEM). The LCN-EPKU2 PC coupler is an active coupling module of the LCN bus system. It is equipped with a USB-C interface and has a connection to the LCN bus. The LCN-EPKU2 has its own processor and optimizes bus access even for those programs/operating systems that are not real-time capable. The LCN-PRO+ and the LCN-GVS communicate with the coupler at 12 times the speed. In addition, the LCN-EPKU2 contains extensive memory that allows bus captures for over 180,000 telegrams. Application Areas Active coupling module of the LCN bus system Directly connectable to the USB interface Seven diagnostic LEDs show the status

Coupling module for connection to a network The LCN-PKE is a highly advanced network coupling module specifically designed for integration into the LCN bus system. It enables seamless communication over LAN via RJ45 or wirelessly via WLAN. With the LCN-PKE, users can efficiently control and monitor their LCN systems by connecting to various network services. Application Areas The LCN-PKE is used in numerous applications, including: Remote maintenance and monitoring with the LCN-PRO software, which allows for easy management and customization of LCN systems. Visualization of system states and control commands via the LCN-GVS software, which provides a user-friendly interface. Coupling with the PCK protocol to integrate data from third-party applications into the LCN system. The module acts as a central access point to the LCN system, allowing installers to parameterize the system and couple it with other systems. Another application case is the connection to the LCN visualization on the PC. With the LCN-GVS system software, bidirectional data exchange between the LCN system states and control commands from the visualization PC is enabled. Hardware Features RJ-45 interface for wired connections. WLAN interface for wireless communication. Direct connection to the LCN bus for easy integration. Optical status indicator showing the operational state of the module. Please note that access to the LCN-PKE with two LCN-PRO of the same license is not possible. Function Description The LCN-PKE supports up to two simultaneous PCHK connections to the LCN bus, allowing both LCN-GVS and LCN-PRO to access the bus at the same time. The PCHK monitor under Windows can optionally be used for configuration and monitoring of the LCN-PKE. For a third connection to the LCN bus, a full version of the LCN-PCHK license is required, and each additional connection requires an upgrade license. Coupling LCN-PCKTo transfer data from a third-party application via LCN-PCK to the LCN bus, the corresponding software is required. This software buffers incoming and outgoing commands and messages, checks and translates them for use in the LCN system. The communication connection uses the TCP/IP network, utilizing simple ASCII character strings. An example of a command could be: M000111A1100010, which means that module 111 in segment 000, output 1 is set to 100 with a ramp of 10. Feedback such as status or measurement values is also returned in a simple and logical format, making implementation in third-party applications easier. Date/TimeWith an existing internet connection, the LCN-PKE regularly updates the time, allowing all LCN modules to display the current time, which is particularly useful when this information is displayed on an LCN-GT4D or LCN-GT10D. This function can be configured via the PKE web interface. Technical Data Connection Supply voltage: 85V - 265V, 50/60 Hz Power consumption: 2 W Terminals/Wire type: tool-free, solid max. 2.5 mm² or stranded with ferrule max. 1.5 mm², through-wiring current max. 16 A Network Connection LAN: RJ45 WLAN: 802.11b/g/n, WPA2 encrypted Installation Operating temperature: -10 to 40 °C Humidity: Max. 80% rel., non-condensing Environmental conditions: Use in fixed installations according to VDE 632, VDE 637 Protection class: IP20 The LCN-PKE galvanically isolates the LCN bus up to 4 kV from the RJ45 socket, ensuring additional safety and reliability.