LCN-GT2B Issendorff KG

LCN - Micro Match 4-pole 70cm double-locking plug, 4 pieces The LCN-IK70 is a high-quality connection cable equipped with double-locking plugs. With a length of 70 cm, it is ideal for connecting LCN devices in various installations. The 4-pole design allows for versatile applications in building automation. Application Examples Cabling of LCN components Expansion of existing systems Technical Data 4-pole locking plug Length: 70 cm Delivery: 4 pieces

Adapter for extending and duplicating the I-connection for the DIN rail The LCN-IVH is an extended version of the LCN-IV adapter, specifically designed for DIN rail mounting. It allows for the doubling of the I-connection and can also be combined with up to two LCN-IVH adapters to extend the range of the I-connection with IY(ST)Y 2x2x0.8mm up to 50m. The LCN-IVH additionally functions as a pulse sensor, evaluating a 5V signal via potential-free contacts. Application Areas This adapter is particularly useful in installations where multiple sensors need to be operated at a bus module. It enables flexible and decentralized installation of sensors such as remote control receivers, temperature sensors, and binary sensors. Technical Data Frequency: maximum 500 Hz Dimensions: 17mm x 92mm x 66mm (W x L x H) DIN rail mounting: 35mm, 1TE Protection class: IP20

This Tweezers The LCN-PINZ is a special tweezers designed for unlocking the LCN glass surface buttons. These buttons are equipped with a lateral locking pin that can be easily removed with the tweezers without causing damage. This greatly facilitates the installation and maintenance of the buttons. Application Examples Installation of LCN glass surface buttons Maintenance and replacement of buttons without damage Technical Data Ergonomic design for easy handling Material: High-quality plastic

Adapter for extending and duplicating the I-connection The LCN-IV is a versatile adapter used to extend and duplicate the I-connection. It allows the connection of up to two LCN-IV adapters to extend the I-connection with IY(ST)Y 2x2x0.8mm up to 50m. Additionally, the LCN-IVH functions as a pulse sensor that evaluates a 5V signal via potential-free contacts. Application Areas This adapter is ideal for applications where multiple sensors need to be operated on a bus module. It enables flexible and decentralized installation of sensors such as remote control receivers, temperature sensors, and binary sensors. Technical Data Frequency: maximum 500 Hz Dimensions: 14mm x 21mm x 12mm (W x L x H)

I-Connection Power Supply for Flush-Mounted Box The LCN-NUI is a power supply specifically designed for flush-mounted boxes, used to supply the LCN-GT switches via the I-connection.

Sensor/Actuator module for flush-mounted boxes with phase-cut and phase-angle dimming The LCN-UPU module is an innovative sensor/actuator module designed for use in flush-mounted boxes. It allows for the control of two electronic outputs with 230V, either switching or dimming. The module is ideal for controlling lighting systems and other electrical devices in modern buildings. Application Examples Control of dimmable LED lights and incandescent lamps. Automation of roller shutters and gates. Integration into smart home systems for individual adjustment of lighting moods. The module features 8 button inputs that allow for individual programming. The integrated operating programs enable switching and dimming of the outputs as well as separate adjustment of brightness and change speed. Additionally, up to 100 lighting scenes can be stored per output. Technical Data Integrated power supply: 230V ±15%, 0.5W, pulse-proof up to 4kV Dimensions: 50mm Ø x 22mm Connection via approx. 20cm long single wires 0.75mm² Protection class: IP20 Communication with up to 30000 modules, max. 250 modules per bus level

Sensor/Actuator Module for Flush-Mounted Box Combined sensor/actuator module with two electronic switching outputs 230V, 300VA. Dimmable in phase-cut or as a switch (switches at zero crossing). The 8 button inputs can individually control 64 target addresses with 192 functions. Integrated pulse measurement input for remote control receivers. The built-in operating program includes the following functions: switching and dimming the outputs, brightness and change speed adjustable separately. Includes programs for incandescent lamp dimming, blinds, gates, etc. Evaluation via 5 thresholds (=10 commands) with hysteresis. Includes 2 continuous controllers that can be used independently and additionally for threshold processing. Two measured values can be recorded and controlled independently of each other. Decoding of the telegrams of the IR remote control receiver or transponder. Evaluation directly or via central computer. Functions for button levels, coded transmission, sender differentiation. Additional functions: control with dependencies, formation of links, counting, calculating, fixed and dynamic group formation, generation of automatic status messages (real feedback) for visualization. LCN System Bus Functions Communication with up to 30,000 modules, max. 250 modules per bus level. Protocol with collision avoidance Documentation and parameterization retrievable in the module memory 100 light scene memories available per output Connection options for EIB/KNX touch sensors (standard), DSI-Dali interface, relays Overload protection, the outputs switch off the consumers in case of excessive loads Note: UPP modules must not be connected directly to roller shutter or blind motors! The end switches or the triacs in the module may be damaged. The use of the isolation relay LCN-R2U is recommended here. A filter (LCN-FI1) is mandatory as soon as the electronic outputs of the LCN-UPP are used as dimmers. The interference filter is connected between the module and the consumer, it dampens the interference occurring during dimming, thus ensuring compliance with CE standards. Technical Data Integrated power supply 230V ±15%, 0.4W, pulse-proof up to 4kV. Flush-mounted housing connection via approx. 20cm long single wires 0.75mm². Dimensions: 50mm Ø x 20mm. Protection class IP20

Sensor module for flush-mounted box 24V~ The LCN-UPS24 flush-mounted module is a highly flexible sensor module specifically designed for integration into dry rooms. It is installed directly in flush-mounted/electronic boxes behind switches, sockets, or in distribution boxes. The module offers a sensor input (T-connection) for connecting conventional switches, LCN-GTx switches, or other peripheral devices. In addition, an I-connection is available that supports a variety of functions, including IR receivers, GT switches, and EnOcean transmitters/receivers. Application Areas Cost-effective connection of LCN sensors and KNX touch sensors or EnOcean wireless touch sensors. Individual room control for cooling, heating, and ventilation. Access control with IR remote control and transponders. Utilization of existing low-voltage wiring. Automation controls with timers and links. Tableau systems with status LEDs and hierarchical links of permissions. Alarm systems with multiple zones and complex conditions. Links across trade boundaries for high functionality. Note: All functions can be used independently and are available simultaneously. Hardware Features Supply voltage: 20-30 Volts~, 50/60 Hz T-connection for up to eight buttons via button converters. I-connection for the operation of LCN-RR, IR remote control receivers, temperature sensors, and other devices. Function Description Four simulated outputs with timers for various functions. Support for DALI groups via LCN-DDR. Connection for eight conventional buttons with extensive command processing. LCN tableau functions with four states. Decoding of the IR remote control receiver with extended functions. Additional functions include the acquisition of measured values, analog value processing, transponder data processing, and code lock functions. The module also provides a bridging of power outages for up to 20 seconds.