LCN-GRTW Issendorff KG

Glass Universal Sensor for temperature, brightness, humidity, motion & IR reception; in champagne The LCN-GUS68C is an elegant universal sensor designed for use in 68mm switch boxes. It offers comprehensive functions for measuring temperature, brightness, humidity, and motion and is compatible with all LCN modules from firmware version 1702 (February 2013). Application Areas This sensor is excellent for modern building automation systems, where it can be used to monitor and control lighting and room climate. It optimizes energy consumption and increases comfort in residential and commercial spaces. Technical Data Installation: For ceiling or wall mounting (switch box 68mm) Dimensions: 90mm x 90mm x 18mm (W x H x D) Protection class housing: IP20 Protection class sensor: IP20

Glass universal sensor for temperature, brightness, humidity, motion & IR reception; in black The LCN-GUSB is a versatile universal sensor specifically designed for accurate measurement of temperature, brightness, humidity, and motion. It features the elegant design of the LCN-GT series and is suitable for use with all LCN modules from firmware version 1702 (February 2013). Application areas The LCN-GUSB is used in modern smart home systems, where it can be used for automatic control of heating, lighting, and air conditioning. By capturing environmental data, it enables intelligent adjustments of room conditions, increases comfort, and saves energy. Technical data Mounting: For ceiling or wall mounting (lamp outlet box 35mm) Dimensions: 60mm x 60mm x 30mm (W x H x D) Protection class housing: IP20 Protection class sensor: IP20

Glass Universal Sensor for Temperature, Brightness, Humidity, Motion & IR Reception; in White The LCN-GUS68W is a specialized universal sensor designed for use in 68mm switch boxes. It offers the same functions as the other models in the LCN-GT series and is compatible with all LCN modules from firmware version 1702 (February 2013). Application Areas This sensor is ideal for integration into modern smart home systems, where it can be used to monitor and control the room climate and lighting. It contributes to energy efficiency and comfort in residential and commercial spaces. Technical Data Installation: For ceiling or wall mounting (switch box 68mm) Dimensions: 90mm x 90mm x 18mm (W x H x D) Protection class housing: IP20 Protection class sensor: IP20

Glass Universal Sensor for Temperature, Brightness, Humidity, Motion & IR Reception; in White The LCN-GUSW is a highly developed universal sensor that offers the same functions as the LCN-GUSB but in an elegant white design. It measures temperature, brightness, humidity, and motion and is suitable for all LCN modules from firmware version 1702 (February 2013). Application Areas Ideal for use in residential and commercial spaces where precise monitoring of environmental conditions is required. The sensor can be used for automatic control of heating and lighting systems to optimize energy consumption. Technical Data Mounting: For ceiling or wall mounting (lamp outlet box 35mm) Dimensions: 60mm x 60mm x 30mm (W x H x D) Protection Class Housing: IP20 Protection Class Sensor: IP20

Issendorff LCN-KUS55W in white The LCN-KUS55W is a multifunctional presence detector designed as an infrared, light, humidity, and temperature sensor for indoor use. It belongs to the LCN-MT4 (System 55) series and is suitable for the I-connection of an LCN bus module from firmware 1E05 (May 2020). The sensor is compatible with the LCN-G55 frames as well as standard 55mm frames. Technical Details Temperature sensor: High-precision measurements with integrated processor Light sensor: Detection of brightness in the range of 1 to 100,000 Lux Presence/motion detector: Detects movements through thermal radiation IR receiver: Processing of signals from the LCN remote controls Application Areas Integrated climate and indoor air control based on temperature and humidity Brightness sensor for constant light control Motion and presence sensor for lighting control IR receiver for controlling the LCN system with an IR remote control

Glass universal sensor for temperature, brightness, humidity, motion & IR reception; in champagne The LCN-GUS is a versatile universal sensor specifically designed for measuring temperature, brightness, humidity, and motion. It also integrates an IR receiver and is designed in the elegant style of the LCN-GT series. This sensor is ideal for use in modern smart home systems and can be used with all LCN modules from firmware version 1702 (February 2013). Application Examples Automatic adjustment of room lighting based on brightness. Temperature monitoring in living and working spaces to optimize the room climate. Motion detection to activate alarm systems or lighting. Technical Data Mounting: For ceiling or wall mounting (lamp outlet box 35mm) Dimensions: 60mm x 60mm x 30mm (W x H x D) Protection class housing: IP20 Protection class sensor: IP20

Glass universal sensor for temperature, brightness, humidity, motion & IR reception; in black The LCN-GUS68B is a versatile universal sensor specifically designed for integration into 68mm switch boxes. It allows precise measurements of temperature, brightness, and humidity, as well as motion detection and IR reception. This product is ideal for modern building automation systems and can be used in conjunction with all LCN modules from firmware version 1702 (February 2013). Application examples Automatic control of lighting based on room brightness. Regulation of room temperature through precise temperature measurement. Motion detection to activate alarm systems or control lights. Technical data Installation: For ceiling or wall mounting (switch box 68mm) Dimensions: 90mm x 90mm x 18mm (W x H x D) Protection class housing: IP20 Protection class sensor: IP20

Issendorff LCN-KUS55B in black The LCN-KUS55B is a presence detector that serves as an infrared, light, humidity, and temperature sensor for indoor use. It is part of the LCN-MT4 (System 55) series and is suitable for the I-connection of an LCN bus module from firmware 1E05 (May 2020). The sensor fits into the LCN-G55 frames or standard 55mm frames. Technical Details Temperature sensor: Provides highly accurate measurements Light sensor: Measures brightness from 1 to 100,000 Lux Motion detector: Detects movements through thermal radiation IR receiver: Processes signals from LCN remote controls Application Areas Climate and indoor air control based on temperature and humidity Brightness sensor for constant light control Motion and presence sensor for lighting control IR receiver for controlling the LCN system with an IR remote control

Sensor/Actuator Module for Flush-Mounted Box Combined sensor/actuator module with two electronic switching outputs 230V, 300VA. Dimmable in phase-cut or as a switch (switches at zero crossing). The 8 button inputs can individually control 64 target addresses with 192 functions. Integrated pulse measurement input for remote control receivers. The built-in operating program includes the following functions: switching and dimming the outputs, brightness and change speed adjustable separately. Includes programs for incandescent lamp dimming, blinds, gates, etc. Evaluation via 5 thresholds (=10 commands) with hysteresis. Includes 2 continuous controllers that can be used independently and additionally for threshold processing. Two measured values can be recorded and controlled independently of each other. Decoding of the telegrams of the IR remote control receiver or transponder. Evaluation directly or via central computer. Functions for button levels, coded transmission, sender differentiation. Additional functions: control with dependencies, formation of links, counting, calculating, fixed and dynamic group formation, generation of automatic status messages (real feedback) for visualization. LCN System Bus Functions Communication with up to 30,000 modules, max. 250 modules per bus level. Protocol with collision avoidance Documentation and parameterization retrievable in the module memory 100 light scene memories available per output Connection options for EIB/KNX touch sensors (standard), DSI-Dali interface, relays Overload protection, the outputs switch off the consumers in case of excessive loads Note: UPP modules must not be connected directly to roller shutter or blind motors! The end switches or the triacs in the module may be damaged. The use of the isolation relay LCN-R2U is recommended here. A filter (LCN-FI1) is mandatory as soon as the electronic outputs of the LCN-UPP are used as dimmers. The interference filter is connected between the module and the consumer, it dampens the interference occurring during dimming, thus ensuring compliance with CE standards. Technical Data Integrated power supply 230V ±15%, 0.4W, pulse-proof up to 4kV. Flush-mounted housing connection via approx. 20cm long single wires 0.75mm². Dimensions: 50mm Ø x 20mm. Protection class IP20

Sensor module for flush-mounted box 24V~ The LCN-UPS24 flush-mounted module is a highly flexible sensor module specifically designed for integration into dry rooms. It is installed directly in flush-mounted/electronic boxes behind switches, sockets, or in distribution boxes. The module offers a sensor input (T-connection) for connecting conventional switches, LCN-GTx switches, or other peripheral devices. In addition, an I-connection is available that supports a variety of functions, including IR receivers, GT switches, and EnOcean transmitters/receivers. Application Areas Cost-effective connection of LCN sensors and KNX touch sensors or EnOcean wireless touch sensors. Individual room control for cooling, heating, and ventilation. Access control with IR remote control and transponders. Utilization of existing low-voltage wiring. Automation controls with timers and links. Tableau systems with status LEDs and hierarchical links of permissions. Alarm systems with multiple zones and complex conditions. Links across trade boundaries for high functionality. Note: All functions can be used independently and are available simultaneously. Hardware Features Supply voltage: 20-30 Volts~, 50/60 Hz T-connection for up to eight buttons via button converters. I-connection for the operation of LCN-RR, IR remote control receivers, temperature sensors, and other devices. Function Description Four simulated outputs with timers for various functions. Support for DALI groups via LCN-DDR. Connection for eight conventional buttons with extensive command processing. LCN tableau functions with four states. Decoding of the IR remote control receiver with extended functions. Additional functions include the acquisition of measured values, analog value processing, transponder data processing, and code lock functions. The module also provides a bridging of power outages for up to 20 seconds.

Universal Roller Shutter/Jalousie Module for Flush-Mounting Box The LCN-UMR module is a state-of-the-art sensor-actuator module specifically designed for controlling roller shutter and jalousie motors. It features two switchable, interlocked relay outputs with a nominal voltage of 230V. The module is ideal for integration into flush-mounting boxes and allows for easy installation and commissioning. Connection Supply voltage: 230V AC ±15%, 50/60Hz (110V AC available) Power consumption: <0.5W Network connection: 5 wires with ferrule 0.75mm² Sensor side connection: T- and I-connection Outputs Type: 2x relays each 6A, interlocked Mechanical lifespan: 1,000,000 switching cycles Switching power: recommended max. 800W Inrush current: max. 50A 8/10µs Installation Operating temperature: -10°C to +40°C Humidity: max. 80% rel., non-condensing Environmental conditions: Use in fixed installation according to VDE632, VDE637 Protection class: IP20 when installed in flush-mounting box, only fixed installation Dimensions (WxDxH): 50mm Ø x 22mm

Sensor module for flush-mounted box The LCN-UPS module is a versatile sensor module designed for use in flush-mounted boxes with an operating voltage of 230V. It allows control of up to 64 target addresses and offers 192 functions that can be programmed individually. Application examples Control of lighting and other electrical devices in residential and commercial spaces. Integration into existing smart home systems for process automation. Use in conjunction with DSI-Dali interfaces for extended functionality. The module offers 8 button inputs and an integrated pulse measurement input for remote control receivers. It allows evaluation over 5 thresholds with hysteresis and includes two continuous controllers that can be used independently of threshold processing. Technical data Integrated power supply: 230V ±15%, 0.4W, pulse-proof up to 4kV Dimensions: 50mm Ø x 12mm Connection via approx. 20cm long single wires 0.75mm² Communication with up to 30000 modules, max. 250 modules per bus level

Sensor/Actuator module for flush-mounted boxes with phase-cut and phase-angle dimming The LCN-UPU module is an innovative sensor/actuator module designed for use in flush-mounted boxes. It allows for the control of two electronic outputs with 230V, either switching or dimming. The module is ideal for controlling lighting systems and other electrical devices in modern buildings. Application Examples Control of dimmable LED lights and incandescent lamps. Automation of roller shutters and gates. Integration into smart home systems for individual adjustment of lighting moods. The module features 8 button inputs that allow for individual programming. The integrated operating programs enable switching and dimming of the outputs as well as separate adjustment of brightness and change speed. Additionally, up to 100 lighting scenes can be stored per output. Technical Data Integrated power supply: 230V ±15%, 0.5W, pulse-proof up to 4kV Dimensions: 50mm Ø x 22mm Connection via approx. 20cm long single wires 0.75mm² Protection class: IP20 Communication with up to 30000 modules, max. 250 modules per bus level

Universal Roller Shutter/Jalousie Module for Flush-Mounting Box The LCN-UMR24 is an advanced sensor-actuator module designed for controlling roller shutter and jalousie motors with a supply voltage of 24V.

Adapter for extending and duplicating the I-connection for the DIN rail The LCN-IVH is an extended version of the LCN-IV adapter, specifically designed for DIN rail mounting. It allows for the doubling of the I-connection and can also be combined with up to two LCN-IVH adapters to extend the range of the I-connection with IY(ST)Y 2x2x0.8mm up to 50m. The LCN-IVH additionally functions as a pulse sensor, evaluating a 5V signal via potential-free contacts. Application Areas This adapter is particularly useful in installations where multiple sensors need to be operated at a bus module. It enables flexible and decentralized installation of sensors such as remote control receivers, temperature sensors, and binary sensors. Technical Data Frequency: maximum 500 Hz Dimensions: 17mm x 92mm x 66mm (W x L x H) DIN rail mounting: 35mm, 1TE Protection class: IP20

Adapter for extending and duplicating the I-connection The LCN-IV is a versatile adapter used to extend and duplicate the I-connection. It allows the connection of up to two LCN-IV adapters to extend the I-connection with IY(ST)Y 2x2x0.8mm up to 50m. Additionally, the LCN-IVH functions as a pulse sensor that evaluates a 5V signal via potential-free contacts. Application Areas This adapter is ideal for applications where multiple sensors need to be operated on a bus module. It enables flexible and decentralized installation of sensors such as remote control receivers, temperature sensors, and binary sensors. Technical Data Frequency: maximum 500 Hz Dimensions: 14mm x 21mm x 12mm (W x L x H)

Adapter for flush-mounted boxes The LCN-A6835 is a practical adapter designed to reduce the size of flush-mounted boxes. With this adapter, the flush-mounted box can be reduced to 68mm x 35mm, allowing for flexible installation in various applications. Application Examples Adjustment of flush-mounted boxes for special buttons or modules Optimization of installation space in tight areas Technical Data Reduction of flush-mounted box to 68mm x 35mm Packaging: 5 pieces